自動開箱機使用簡介及特點

閱讀:404次    日期:2020-09-30
 

一、自動開箱機產品基本介紹:

山東xrk93xyz下载中舜智能裝備有限公司自動開箱機適用於紙箱的自動成型,自動折紙蓋,自動膠帶封底蓋之功能,經濟又高效,是較為理想的紙箱自動成型封底之設備。

自動開箱機

1、 Basic introduction of automatic unpacking machine:

Shandong alite Zhongshun Intelligent Equipment Co., Ltd. the machine is suitable for automatic carton forming, automatic folding cover and automatic tape back cover. It is economical and efficient, and is an ideal equipment for automatic carton forming and sealing.

二、自動開箱機主要技術參數:

開箱寬度: 150mm-400mm

開箱高度: 100mm-350mm

開箱長度: 200mm-450mm

台麵高度: 600mm-720mm

外型尺寸: L2000mm×W1900mm×H1450mm

封箱速度: 20m/min

適用電源: 220v/380v  56/60Hz

氣壓源供應: 5.5-6kg/cm2

適用膠帶: W(48,60,72)mm×L1000y

機械重量: 400kg

這隻是其中一款機型,還可根據您的要求來定製。

2、 Main technical parameters of automatic unpacking machine:

Box width: 150 mm-400 mm

Opening height: 100 MM-350 mm

Box length: 200 mm-450 mm

Table height: 600mm-720mm

Dimension: l2000mm × w1900mm × h1450mm

Sealing speed: 20m / min

Applicable power supply: 220 V / 380 V 56 / 60 Hz

Air pressure supply: 5.5-6kg/cm2

Applicable tape: w (48,60,72) mm × l1000y

Mechanical weight: 400kg

This is only one of the models. It can be customized according to your requirements.

三、技術特點:

1.采用4組日本SMC吸盤,並能精確調整定位,使紙箱打開平穩,大幅度提高開箱合格率,避免紙箱折疊報廢。

2.雙氣缸結合擺臂折蓋,解決了單氣缸平衡以及力度不夠引起折蓋不到位的情況。

3.渦輪式矽橡膠帖帶輪,有極高彈性,解決了以其他設備采用塑料帖帶輪引起貼帶翅角或不平的情況。

4.采用觸摸屏人機界麵操作,故障顯示,自動報警,操作簡單。

5.德國西門子PLC控製,確保設備穩定運行。

3、 Technical features:

1. Four sets of Japanese SMC suction cups are adopted, and the positioning can be adjusted accurately, so that the carton can be opened smoothly, the qualified rate of unpacking can be greatly improved, and the carton folding and scrapping can be avoided.

2. Double cylinder combined with swing arm folding cover can solve the problem that single cylinder balance and insufficient strength cause the cover not in place.

3. The turbine type silicone rubber taping wheel has high elasticity, which can solve the problem that the wing angle or unevenness is caused by the plastic taping wheel used in other equipment.

4. Touch screen man-machine interface operation, fault display, automatic alarm, simple operation.

5. Siemens PLC control ensures stable operation of the equipment.