安全操作機器人碼垛機

閱讀:219次    日期:2020-10-12
 

隨著科技的發展和進步,許多廠家都有意向采購機器人碼垛機,那麽您應該如何操作機器人碼垛機?山東xrk93xyz下载中舜智能裝備有限公司小編來為您詳細解答。

With the development and progress of science and technology, many manufacturers are interested in purchasing robot palletizer, so how do you operate the robot palletizer? Shandong ellite Zhongshun Intelligent Equipment Co., Ltd. made up a small group to give you a detailed answer.

5f4a04239a3f7.jpg

1、在使用自動碼垛機之前,請先檢查電源是否正確連接,插頭是否鬆動以及在啟動電源之前沒有問題。

2、在操作自動碼垛機之前,請閱讀用戶手冊並了解其操作。

3、在正常使用期間,xrk93换地址了吗需要檢查自動碼垛機的零件是否鬆動或丟失,使用自動碼垛機時是否有任何問題,會影響生產線的運行。

4、自動碼垛機工作時,禁止在設備下方使用,並且必須與設備保持一定距離。工作過程完成後,您將靠近設備,以免發生意外。

5、機器在運行中,禁止到達傳送帶或鏈條進行維護和檢查,或違反規定操作,以免造成傷害。如果有問題,請在操作之前停止電源。

6、當機器離開其原始位置時,測試完成後,特殊技術人員應在重新安裝和使用機器之前檢查它是否正常。

7、定期檢查電氣鏈路並清潔設備。

1. Before using the automatic palletizer, please check whether the power supply is correctly connected, whether the plug is loose and there is no problem before starting the power supply.

2. Before operating the automatic palletizer, read the user's manual and understand its operation.

3. During normal use, we need to check whether the parts of the automatic palletizer are loose or missing, and if there are any problems when using the automatic palletizer, which will affect the operation of the production line.

4. When the automatic palletizer is working, it is forbidden www.amital-nechasim.com to use it under the equipment and must keep a certain distance from the equipment. After the working process is completed, you will be close to the equipment to avoid accidents.

5. When the machine is in operation, it is forbidden to reach the conveyor belt or chain for maintenance and inspection, or operate in violation of regulations, so as to avoid injury. If there is a problem, stop the power supply before operation.

6. When the machine leaves its original position, after the test, the special technician should check whether it is normal before re installing and using the machine.

7. Check the electrical links regularly and clean the equipment.